The Coinco BA32R was the staple of the vending validator market from 1991 through the early 2000s.
Even though these validators are over older models, they are still being used in huge quantities by vendors everywhere..
The BA3xx was the first MDB bill acceptor ever made; MDB (Multi Drop Bus) was invented by Coinco in the 1990s..
The BA32R, its sister models, and most of Coinco's validators made to this day run on dual interfaces and voltages..
The BA32R runs on MDB/Pulse/Serial 24/34 volts only, and comes with a 24 volt power harness..
This makes it an extremely versatile bill acceptor, as it will replace any MEI 2000 series 24 volt or MDB bill validator.
Voltage: 24/34 volts
Bill box size: 300 note
Bezel type: Coinco (Snack) style bezel
Bills accepted: $1 bills
Includes: 24 volt power/pulse harness
Features: Has 9 pin molex power harness, and 18 pin data plug, so it will replace any MEI 24 volt validator
Great Returns - Commercial Grade Machines - Affordability
New vs Refurbished
We used to sell new machines as well as reconditioned. We no longer sell new for the following reason: According to a recent survey of vending operators about 93 out of 100 potential vending accounts do not make enough revenue to warrant the cost of new equipment. New machines are great if you have high volume accounts, but most people do not have these accounts. Typical cost on new 'commercial grade' machines run as much as: Can drink $3400-$4800, Snack $3600-$4500, Cold food $7200-$8500, as you can see quite high compared to used or refurbished. Priced with mech and validator, typical options, vendor pricing, not including sales tax or shipping in some cases. Please remember 'anyone and everyone' can call their machines refurbished but what does that really mean? Please see our machine ratings page for what we actually do to our machines. Many of our competitors don't even 'clean or paint the inside' of the machines.
Start small and grow as you can afford it.
Many people start in the vending business without much knowledge. This can hurt you financially if you are not careful. All of the machines that we sell are full size, commercial machines. There are many machines that are made that are small, countertop or mechanical coin acceptance. These machines are fine if you are a housewife looking to make a little extra money on the side. We used to sell those type of machines and no longer do. The main reason is that people who were serious about vending would out grow these type of machines in several months. There are two main problems with the small mechanical machines. One problem is the machine does not make change or take dollar bills. The second problem is that the machine will 'work you to death'. Most of these machines hold under 100 products and can only gross $40 to $50 at a time, if the entire machine empties out. This is only the gross, the profit is less than 1/2 of that amount. A full size commercial machine on the other hand usually holds 350 to 600 products and empties out at $250 to $500. Remember you spend the most time driving to the location so you might as well fill 500 products as soon as 50.
Why people choose Vending World?
Welcome to vendingworld.com! We are the largest distributor on the west coast of refurbished vending machines.
Here are few reasons why people choose Vending World:
20 years of trust and still counting: Thank you for making us the largest seller of refurbished and used vending equipment in California 20 years on the internet 1998-2018.
Largest seller: We are the largest selller in California, In total sales of used vending machines, refurbished vending machines, wholesale vending machines and vending parts from 2005-2018.
Wide variety of brands and models to choose from: We sell vending machines and parts from the following fine manufactures on this site: Automatic Products, Coinco, Conlux, Crane Dixie Narco, Crane National, Mars Electronics, National Vendors, Rowe International, Vendo Sanden.
12,000 square foot facility: We are located at Rancho Cucamonga, a premiere city in the Inland Empire of California -- one of the nation's fastest growing metropolitan areas. Located 37 miles east of downtown Los Angeles..
90 days limited period warranty: All machines on our website come with a 90 day limited parts warranty to give you the piece of mind after the delivery of your machines.