Dixie Narco Shim For 2145, 5591, 12oz Can 3/16" #801813630.21 (NEW)
- Dixie Narco
- 12 oz Can Shim Tall
- Fits 5591, DN5000
- Fits 2145 With Tall Gates
- 3/16" .155 Shim
- Mfg #80181363021
- Was W212-1
- *READ BELOW BEFORE ORDERING
- NEW PART
- Buy 9 for $5.49 each and save 7%
- Buy 18 for $5.09 each and save 14%
- Buy 27 for $4.99 each and save 15%
Shipping Length: 5.75 inches
Shipping Width: 4.25 inches
Shipping Height: 0.25 inches
For Use With: Dixie Narco
*Due to customers ordering the wrong size shims, all shims are non returnable, so please read this before ordering
The shims listed on our website that are listed as 12oz cans, 16oz bottles and 20oz bottles are designed for STANDARD VENDING SIZE cans and bottles. Please be aware that there are hundreds of these cans and bottles made and sold all over the USA that are not these standard sizes and have larger or smaller diameters. Due to this fact if you are not sure of the size shim that you need we recommend that you buy one or two of the size of shims that you think you need as samples to verify that they work with your product before buying them in quantity. If you need special shims in quantity for a custom product and you have the Dixie Narco part number please contact us and we will quote you for price and availability.
The Dixie Narco model 5591 is one of the most versatile machines made. Due to the large amount of different shims available this machine can vend almost any size packaged drink with proper shimming.
Why Buy A Refurbished Machine?
Great Returns - Commercial Grade Machines - Affordability
New vs Refurbished
We used to sell new machines as well as reconditioned. We no longer sell new for the following reason: According to a recent survey of vending operators about 93 out of 100 potential vending accounts do not make enough revenue to warrant the cost of new equipment. New machines are great if you have high volume accounts, but most people do not have these accounts. Typical cost on new 'commercial grade' machines run as much as: Can drink $3400-$4800, Snack $3600-$4500, Cold food $7200-$8500, as you can see quite high compared to used or refurbished. Priced with mech and validator, typical options, vendor pricing, not including sales tax or shipping in some cases. Please remember 'anyone and everyone' can call their machines refurbished but what does that really mean? Please see our machine ratings page for what we actually do to our machines. Many of our competitors don't even 'clean or paint the inside' of the machines.Start small and grow as you can afford it.
Many people start in the vending business without much knowledge. This can hurt you financially if you are not careful. All of the machines that we sell are full size, commercial machines. There are many machines that are made that are small, countertop or mechanical coin acceptance. These machines are fine if you are a housewife looking to make a little extra money on the side. We used to sell those type of machines and no longer do. The main reason is that people who were serious about vending would out grow these type of machines in several months. There are two main problems with the small mechanical machines. One problem is the machine does not make change or take dollar bills. The second problem is that the machine will 'work you to death'. Most of these machines hold under 100 products and can only gross $40 to $50 at a time, if the entire machine empties out. This is only the gross, the profit is less than 1/2 of that amount. A full size commercial machine on the other hand usually holds 350 to 600 products and empties out at $250 to $500. Remember you spend the most time driving to the location so you might as well fill 500 products as soon as 50.