AP 123/122/121/320 Selection Membrane (360253) (NEW)
Automatic Products 111/112/113 (660366) Touch Pad Membrane
Dixie Narco 2145, 5591 Bev-Max Keypad Membrane (8049182600) (NEW)
Automatic Products AP 121, 122, 123 and 320 Selection Membrane
Restore a clear, usable selection and pricing control area with the new Automatic Products selection membrane, manufacturer part 360253. This replacement part is listed for AP 121, AP 122, AP 123 and AP 320 vending machines. Check your existing part and machine version before ordering.
- Brand: Automatic Products (AP)
- Part: selection and pricing membrane
- Manufacturer number: 360253
- Vending World SKU: AP360253
- Condition: new, not refurbished
- Listed models: AP 121, 122, 123 and 320
A simple way to refresh the control area
The selection membrane is part of the area an operator uses to interact with the machine. A worn face or poor response can make daily service harder. A correctly matched replacement can help bring the controls back into working order. The membrane alone cannot fix every control problem.
- Confirm the AP model and machine version.
- Use manufacturer number 360253 as a key reference.
- Check the original part before fitting a replacement.
Why the part number matters
Model names are a useful starting point. They are not always enough to confirm a match. Compare the number 360253 with the part you are removing. Look at the connector, contact layout, shape and mounting position. A similar-looking membrane may not use the same connection.
- Confirm the AP model and machine version.
- Use manufacturer number 360253 as a key reference.
- Check the original part before fitting a replacement.
Designed for several AP models
The product listing names the Automatic Products 121, 122, 123 and 320. These are the stated applications for this part. Changes made to a machine over time may affect its parts. Confirm the exact setup before you buy.
- Confirm the AP model and machine version.
- Use manufacturer number 360253 as a key reference.
- Check the original part before fitting a replacement.
New replacement part
This listing identifies the membrane as new. It is not described as a rebuilt or used part. A new membrane is a useful option when an older unit has wear, damage or unreliable input. It still needs the correct machine connection to work as intended.
- Confirm the AP model and machine version.
- Use manufacturer number 360253 as a key reference.
- Check the original part before fitting a replacement.
Selection and pricing functions
The product is described as both a selection membrane and a pricing membrane. These terms refer to its role in the machine control area. The exact buttons and programming steps depend on the machine. Refer to the correct service guide for the machine in front of you.
- Confirm the AP model and machine version.
- Use manufacturer number 360253 as a key reference.
- Check the original part before fitting a replacement.
Check the symptoms first
A button that does not respond may point to a worn membrane. It may also point to a loose cable, a control board issue or another fault. Check for visible damage and note which inputs fail. Do not assume every input fault is caused by the membrane.
- Confirm the AP model and machine version.
- Use manufacturer number 360253 as a key reference.
- Check the original part before fitting a replacement.
Before placing an order
Read the model plate. Compare the old membrane with the product photo. Check the manufacturer number if it is visible. Inspect the connector without pulling on its wires. If the part does not match, confirm the correct replacement before proceeding.
- Confirm the AP model and machine version.
- Use manufacturer number 360253 as a key reference.
- Check the original part before fitting a replacement.
Plan a careful replacement
Switch the vending machine off and disconnect it from power before opening the control area. Follow the machine service instructions. Avoid bending the membrane sharply or touching exposed contacts. Do not force a connector into a socket.
- Confirm the AP model and machine version.
- Use manufacturer number 360253 as a key reference.
- Check the original part before fitting a replacement.
After installation
Once the machine is reassembled, restore power and follow the service guide to test the control area. Check each available selection or pricing input. Verify that the machine responds as expected. If it does not, stop and inspect the installation and other related parts.
- Confirm the AP model and machine version.
- Use manufacturer number 360253 as a key reference.
- Check the original part before fitting a replacement.
Keep your service records clear
Record the machine model, the part number 360253 and the date of replacement. This makes later service easier. A short note about the original symptom may also help when the machine needs attention again.
- Confirm the AP model and machine version.
- Use manufacturer number 360253 as a key reference.
- Check the original part before fitting a replacement.
For vending operators
A control issue can interrupt routine price changes and product setup. Keeping the correct replacement part on hand may reduce delays. Buy by confirmed part number rather than appearance alone.
- Confirm the AP model and machine version.
- Use manufacturer number 360253 as a key reference.
- Check the original part before fitting a replacement.
For repair shops
The listed AP model range can help narrow a parts search. Match the original membrane and connection before work begins. Test the machine after fitting the replacement. Document any other fault found during service.
- Confirm the AP model and machine version.
- Use manufacturer number 360253 as a key reference.
- Check the original part before fitting a replacement.
What is included
The product listing identifies one new selection membrane. It does not state that a control board, wiring harness, tools or other hardware are included. Treat those items as separate unless confirmed by the seller.
- Confirm the AP model and machine version.
- Use manufacturer number 360253 as a key reference.
- Check the original part before fitting a replacement.
A note on fit
Compatibility refers to the listed AP models, but individual machine revisions may differ. A part can look close and still be wrong. Match the part number, connector and machine configuration to avoid ordering the wrong item.
- Confirm the AP model and machine version.
- Use manufacturer number 360253 as a key reference.
- Check the original part before fitting a replacement.
Care and handling
Keep the membrane clean and dry while it is being installed. Do not use harsh cleaners on electrical contacts. Store unused parts flat in a safe place. Protect the connection area from dust, moisture and sharp objects.
- Confirm the AP model and machine version.
- Use manufacturer number 360253 as a key reference.
- Check the original part before fitting a replacement.
When to seek help
If you cannot identify the old part, consult a qualified vending technician or the machine documentation. Electrical and control work can involve hazards. Never test exposed live parts without proper training and equipment.
- Confirm the AP model and machine version.
- Use manufacturer number 360253 as a key reference.
- Check the original part before fitting a replacement.
Frequently asked questions
Which machines are listed?
Automatic Products 121, 122, 123 and 320.
Is this part new?
Yes. The product listing describes it as a new part.
What is the manufacturer part number?
The listed manufacturer number is 360253.
What is the store SKU?
The Vending World SKU is AP360253.
Does it include a control board?
The listing identifies a selection membrane only. No control board is specified.
Will it fix every unresponsive button?
No. A cable, connection, board or another part can also cause input problems.
Should I match the old connector?
Yes. Compare the existing part and connection before ordering.
Can I install it with the machine powered on?
No. Disconnect power and follow the proper service procedure.
Can a machine revision change compatibility?
It may. Check the machine configuration and original part.
Is the membrane a complete keypad assembly?
The listing calls it a selection and pricing membrane. Other components are not confirmed as included.
Confirm the model plate
Find the machine model label before you order. The listed model should be 121, 122, 123 or 320. If a machine was changed in the past, the installed control parts may not match its original build.
Compare the face
Look at the size, shape and printed control area on the old membrane. A visual match is helpful but not final proof. The connection and part number matter just as much.
Inspect the connection
Look for a damaged or loose connection. Follow the service guide when opening the control panel. Never pull a cable by its conductors. Use the proper release method if a connector has a lock.
Keep the work area clean
Dust and moisture can make a repair harder. Use a clean, dry surface for the replacement part. Keep loose screws and tools away from exposed control components.
Avoid force
A membrane and its connection can be damaged by rough handling. Do not fold the part or push a connector that does not line up. Stop and compare the old and new parts if something feels wrong.
Test one input at a time
After safe reassembly, use the machine guide to test the available controls. Work through the inputs in a steady order. Note any button that still fails so you can check the full control path.
Record the repair
Write down the date and the installed part number. Include the machine model and the original symptom. Good notes make future troubleshooting faster for you or another technician.
Know the limits of a membrane
A membrane is one part of a larger control system. Replacing it does not repair a damaged board, power issue or wiring fault. A sound diagnosis helps avoid buying parts you do not need.
Use the correct manual
Machine guides can differ by model and revision. Find instructions for the exact unit being serviced. The guide can help with safe access, connection checks and input tests.
Review the order details
Before checkout, confirm that the item is the new AP selection membrane, number 360253. Check the quantity you need. Verify shipping and return terms on the seller site.
Protect the new part
Leave the replacement protected until you are ready to install it. Keep it away from heat, liquid and sharp edges. Handle the connector area with care.
Support reliable service
Clear controls help operators manage a vending machine. A properly matched membrane can be one part of restoring normal service. Finish with a full check of the machine, not just a quick button press.
Confirm the model plate
Find the machine model label before you order. The listed model should be 121, 122, 123 or 320. If a machine was changed in the past, the installed control parts may not match its original build.
Compare the face
Look at the size, shape and printed control area on the old membrane. A visual match is helpful but not final proof. The connection and part number matter just as much.
Inspect the connection
Look for a damaged or loose connection. Follow the service guide when opening the control panel. Never pull a cable by its conductors. Use the proper release method if a connector has a lock.
Keep the work area clean
Dust and moisture can make a repair harder. Use a clean, dry surface for the replacement part. Keep loose screws and tools away from exposed control components.
Avoid force
A membrane and its connection can be damaged by rough handling. Do not fold the part or push a connector that does not line up. Stop and compare the old and new parts if something feels wrong.
Test one input at a time
After safe reassembly, use the machine guide to test the available controls. Work through the inputs in a steady order. Note any button that still fails so you can check the full control path.
Record the repair
Write down the date and the installed part number. Include the machine model and the original symptom. Good notes make future troubleshooting faster for you or another technician.
Know the limits of a membrane
A membrane is one part of a larger control system. Replacing it does not repair a damaged board, power issue or wiring fault. A sound diagnosis helps avoid buying parts you do not need.
Use the correct manual
Machine guides can differ by model and revision. Find instructions for the exact unit being serviced. The guide can help with safe access, connection checks and input tests.
Review the order details
Before checkout, confirm that the item is the new AP selection membrane, number 360253. Check the quantity you need. Verify shipping and return terms on the seller site.
Protect the new part
Leave the replacement protected until you are ready to install it. Keep it away from heat, liquid and sharp edges. Handle the connector area with care.
Support reliable service
Clear controls help operators manage a vending machine. A properly matched membrane can be one part of restoring normal service. Finish with a full check of the machine, not just a quick button press.
Confirm the model plate
Find the machine model label before you order. The listed model should be 121, 122, 123 or 320. If a machine was changed in the past, the installed control parts may not match its original build.
Compare the face
Look at the size, shape and printed control area on the old membrane. A visual match is helpful but not final proof. The connection and part number matter just as much.
Inspect the connection
Look for a damaged or loose connection. Follow the service guide when opening the control panel. Never pull a cable by its conductors. Use the proper release method if a connector has a lock.
Keep the work area clean
Dust and moisture can make a repair harder. Use a clean, dry surface for the replacement part. Keep loose screws and tools away from exposed control components.
Avoid force
A membrane and its connection can be damaged by rough handling. Do not fold the part or push a connector that does not line up. Stop and compare the old and new parts if something feels wrong.
Test one input at a time
After safe reassembly, use the machine guide to test the available controls. Work through the inputs in a steady order. Note any button that still fails so you can check the full control path.
Record the repair
Write down the date and the installed part number. Include the machine model and the original symptom. Good notes make future troubleshooting faster for you or another technician.
Know the limits of a membrane
A membrane is one part of a larger control system. Replacing it does not repair a damaged board, power issue or wiring fault. A sound diagnosis helps avoid buying parts you do not need.
Use the correct manual
Machine guides can differ by model and revision. Find instructions for the exact unit being serviced. The guide can help with safe access, connection checks and input tests.
Review the order details
Before checkout, confirm that the item is the new AP selection membrane, number 360253. Check the quantity you need. Verify shipping and return terms on the seller site.
Protect the new part
Leave the replacement protected until you are ready to install it. Keep it away from heat, liquid and sharp edges. Handle the connector area with care.
Support reliable service
Clear controls help operators manage a vending machine. A properly matched membrane can be one part of restoring normal service. Finish with a full check of the machine, not just a quick button press.
Confirm the model plate
Find the machine model label before you order. The listed model should be 121, 122, 123 or 320. If a machine was changed in the past, the installed control parts may not match its original build.
Compare the face
Look at the size, shape and printed control area on the old membrane. A visual match is helpful but not final proof. The connection and part number matter just as much.
Inspect the connection
Look for a damaged or loose connection. Follow the service guide when opening the control panel. Never pull a cable by its conductors. Use the proper release method if a connector has a lock.
Keep the work area clean
Dust and moisture can make a repair harder. Use a clean, dry surface for the replacement part. Keep loose screws and tools away from exposed control components.
Avoid force
A membrane and its connection can be damaged by rough handling. Do not fold the part or push a connector that does not line up. Stop and compare the old and new parts if something feels wrong.
Test one input at a time
After safe reassembly, use the machine guide to test the available controls. Work through the inputs in a steady order. Note any button that still fails so you can check the full control path.
Record the repair
Write down the date and the installed part number. Include the machine model and the original symptom. Good notes make future troubleshooting faster for you or another technician.
Know the limits of a membrane
A membrane is one part of a larger control system. Replacing it does not repair a damaged board, power issue or wiring fault. A sound diagnosis helps avoid buying parts you do not need.
Use the correct manual
Machine guides can differ by model and revision. Find instructions for the exact unit being serviced. The guide can help with safe access, connection checks and input tests.
Review the order details
Before checkout, confirm that the item is the new AP selection membrane, number 360253. Check the quantity you need. Verify shipping and return terms on the seller site.
Protect the new part
Leave the replacement protected until you are ready to install it. Keep it away from heat, liquid and sharp edges. Handle the connector area with care.
Support reliable service
Clear controls help operators manage a vending machine. A properly matched membrane can be one part of restoring normal service. Finish with a full check of the machine, not just a quick button press.
Confirm the model plate
Find the machine model label before you order. The listed model should be 121, 122, 123 or 320. If a machine was changed in the past, the installed control parts may not match its original build.
Compare the face
Look at the size, shape and printed control area on the old membrane. A visual match is helpful but not final proof. The connection and part number matter just as much.
Inspect the connection
Look for a damaged or loose connection. Follow the service guide when opening the control panel. Never pull a cable by its conductors. Use the proper release method if a connector has a lock.
Keep the work area clean
Dust and moisture can make a repair harder. Use a clean, dry surface for the replacement part. Keep loose screws and tools away from exposed control components.
Avoid force
A membrane and its connection can be damaged by rough handling. Do not fold the part or push a connector that does not line up. Stop and compare the old and new parts if something feels wrong.
Test one input at a time
After safe reassembly, use the machine guide to test the available controls. Work through the inputs in a steady order. Note any button that still fails so you can check the full control path.
Record the repair
Write down the date and the installed part number. Include the machine model and the original symptom. Good notes make future troubleshooting faster for you or another technician.
Know the limits of a membrane
A membrane is one part of a larger control system. Replacing it does not repair a damaged board, power issue or wiring fault. A sound diagnosis helps avoid buying parts you do not need.
Use the correct manual
Machine guides can differ by model and revision. Find instructions for the exact unit being serviced. The guide can help with safe access, connection checks and input tests.
Review the order details
Before checkout, confirm that the item is the new AP selection membrane, number 360253. Check the quantity you need. Verify shipping and return terms on the seller site.
Protect the new part
Leave the replacement protected until you are ready to install it. Keep it away from heat, liquid and sharp edges. Handle the connector area with care.
Support reliable service
Clear controls help operators manage a vending machine. A properly matched membrane can be one part of restoring normal service. Finish with a full check of the machine, not just a quick button press.
Confirm the model plate
Find the machine model label before you order. The listed model should be 121, 122, 123 or 320. If a machine was changed in the past, the installed control parts may not match its original build.
Compare the face
Look at the size, shape and printed control area on the old membrane. A visual match is helpful but not final proof. The connection and part number matter just as much.
Inspect the connection
Look for a damaged or loose connection. Follow the service guide when opening the control panel. Never pull a cable by its conductors. Use the proper release method if a connector has a lock.
Keep the work area clean
Dust and moisture can make a repair harder. Use a clean, dry surface for the replacement part. Keep loose screws and tools away from exposed control components.
Avoid force
A membrane and its connection can be damaged by rough handling. Do not fold the part or push a connector that does not line up. Stop and compare the old and new parts if something feels wrong.
Test one input at a time
After safe reassembly, use the machine guide to test the available controls. Work through the inputs in a steady order. Note any button that still fails so you can check the full control path.
Record the repair
Write down the date and the installed part number. Include the machine model and the original symptom. Good notes make future troubleshooting faster for you or another technician.
Know the limits of a membrane
A membrane is one part of a larger control system. Replacing it does not repair a damaged board, power issue or wiring fault. A sound diagnosis helps avoid buying parts you do not need.
Use the correct manual
Machine guides can differ by model and revision. Find instructions for the exact unit being serviced. The guide can help with safe access, connection checks and input tests.
Review the order details
Before checkout, confirm that the item is the new AP selection membrane, number 360253. Check the quantity you need. Verify shipping and return terms on the seller site.
Protect the new part
Leave the replacement protected until you are ready to install it. Keep it away from heat, liquid and sharp edges. Handle the connector area with care.
Support reliable service
Clear controls help operators manage a vending machine. A properly matched membrane can be one part of restoring normal service. Finish with a full check of the machine, not just a quick button press.
Confirm the model plate
Find the machine model label before you order. The listed model should be 121, 122, 123 or 320. If a machine was changed in the past, the installed control parts may not match its original build.
Compare the face
Look at the size, shape and printed control area on the old membrane. A visual match is helpful but not final proof. The connection and part number matter just as much.
Inspect the connection
Look for a damaged or loose connection. Follow the service guide when opening the control panel. Never pull a cable by its conductors. Use the proper release method if a connector has a lock.
Keep the work area clean
Dust and moisture can make a repair harder. Use a clean, dry surface for the replacement part. Keep loose screws and tools away from exposed control components.
Avoid force
A membrane and its connection can be damaged by rough handling. Do not fold the part or push a connector that does not line up. Stop and compare the old and new parts if something feels wrong.
Test one input at a time
After safe reassembly, use the machine guide to test the available controls. Work through the inputs in a steady order. Note any button that still fails so you can check the full control path.
Record the repair
Write down the date and the installed part number. Include the machine model and the original symptom. Good notes make future troubleshooting faster for you or another technician.
Know the limits of a membrane
A membrane is one part of a larger control system. Replacing it does not repair a damaged board, power issue or wiring fault. A sound diagnosis helps avoid buying parts you do not need.
Use the correct manual
Machine guides can differ by model and revision. Find instructions for the exact unit being serviced. The guide can help with safe access, connection checks and input tests.
Review the order details
Before checkout, confirm that the item is the new AP selection membrane, number 360253. Check the quantity you need. Verify shipping and return terms on the seller site.
Protect the new part
Leave the replacement protected until you are ready to install it. Keep it away from heat, liquid and sharp edges. Handle the connector area with care.
Support reliable service
Clear controls help operators manage a vending machine. A properly matched membrane can be one part of restoring normal service. Finish with a full check of the machine, not just a quick button press.
Confirm the model plate
Find the machine model label before you order. The listed model should be 121, 122, 123 or 320. If a machine was changed in the past, the installed control parts may not match its original build.
Compare the face
Look at the size, shape and printed control area on the old membrane. A visual match is helpful but not final proof. The connection and part number matter just as much.
Inspect the connection
Look for a damaged or loose connection. Follow the service guide when opening the control panel. Never pull a cable by its conductors. Use the proper release method if a connector has a lock.
Keep the work area clean
Dust and moisture can make a repair harder. Use a clean, dry surface for the replacement part. Keep loose screws and tools away from exposed control components.
Avoid force
A membrane and its connection can be damaged by rough handling. Do not fold the part or push a connector that does not line up. Stop and compare the old and new parts if something feels wrong.
Test one input at a time
After safe reassembly, use the machine guide to test the available controls. Work through the inputs in a steady order. Note any button that still fails so you can check the full control path.
Record the repair
Write down the date and the installed part number. Include the machine model and the original symptom. Good notes make future troubleshooting faster for you or another technician.
Know the limits of a membrane
A membrane is one part of a larger control system. Replacing it does not repair a damaged board, power issue or wiring fault. A sound diagnosis helps avoid buying parts you do not need.
Use the correct manual
Machine guides can differ by model and revision. Find instructions for the exact unit being serviced. The guide can help with safe access, connection checks and input tests.
Review the order details
Before checkout, confirm that the item is the new AP selection membrane, number 360253. Check the quantity you need. Verify shipping and return terms on the seller site.
Protect the new part
Leave the replacement protected until you are ready to install it. Keep it away from heat, liquid and sharp edges. Handle the connector area with care.
Support reliable service
Clear controls help operators manage a vending machine. A properly matched membrane can be one part of restoring normal service. Finish with a full check of the machine, not just a quick button press.
Confirm the model plate
Find the machine model label before you order. The listed model should be 121, 122, 123 or 320. If a machine was changed in the past, the installed control parts may not match its original build.
Compare the face
Look at the size, shape and printed control area on the old membrane. A visual match is helpful but not final proof. The connection and part number matter just as much.
Inspect the connection
Look for a damaged or loose connection. Follow the service guide when opening the control panel. Never pull a cable by its conductors. Use the proper release method if a connector has a lock.
Keep the work area clean
Dust and moisture can make a repair harder. Use a clean, dry surface for the replacement part. Keep loose screws and tools away from exposed control components.
Avoid force
A membrane and its connection can be damaged by rough handling. Do not fold the part or push a connector that does not line up. Stop and compare the old and new parts if something feels wrong.
Test one input at a time
After safe reassembly, use the machine guide to test the available controls. Work through the inputs in a steady order. Note any button that still fails so you can check the full control path.
Record the repair
Write down the date and the installed part number. Include the machine model and the original symptom. Good notes make future troubleshooting faster for you or another technician.
Know the limits of a membrane
A membrane is one part of a larger control system. Replacing it does not repair a damaged board, power issue or wiring fault. A sound diagnosis helps avoid buying parts you do not need.
Use the correct manual
Machine guides can differ by model and revision. Find instructions for the exact unit being serviced. The guide can help with safe access, connection checks and input tests.
Review the order details
Before checkout, confirm that the item is the new AP selection membrane, number 360253. Check the quantity you need. Verify shipping and return terms on the seller site.
Protect the new part
Leave the replacement protected until you are ready to install it. Keep it away from heat, liquid and sharp edges. Handle the connector area with care.
Support reliable service
Clear controls help operators manage a vending machine. A properly matched membrane can be one part of restoring normal service. Finish with a full check of the machine, not just a quick button press.
Confirm the model plate
Find the machine model label before you order. The listed model should be 121, 122, 123 or 320. If a machine was changed in the past, the installed control parts may not match its original build.
Compare the face
Look at the size, shape and printed control area on the old membrane. A visual match is helpful but not final proof. The connection and part number matter just as much.
Inspect the connection
Look for a damaged or loose connection. Follow the service guide when opening the control panel. Never pull a cable by its conductors. Use the proper release method if a connector has a lock.
Keep the work area clean
Dust and moisture can make a repair harder. Use a clean, dry surface for the replacement part. Keep loose screws and tools away from exposed control components.
Avoid force
A membrane and its connection can be damaged by rough handling. Do not fold the part or push a connector that does not line up. Stop and compare the old and new parts if something feels wrong.
Test one input at a time
After safe reassembly, use the machine guide to test the available controls. Work through the inputs in a steady order. Note any button that still fails so you can check the full control path.
Record the repair
Write down the date and the installed part number. Include the machine model and the original symptom. Good notes make future troubleshooting faster for you or another technician.
Know the limits of a membrane
A membrane is one part of a larger control system. Replacing it does not repair a damaged board, power issue or wiring fault. A sound diagnosis helps avoid buying parts you do not need.
Use the correct manual
Machine guides can differ by model and revision. Find instructions for the exact unit being serviced. The guide can help with safe access, connection checks and input tests.
Review the order details
Before checkout, confirm that the item is the new AP selection membrane, number 360253. Check the quantity you need. Verify shipping and return terms on the seller site.
Protect the new part
Leave the replacement protected until you are ready to install it. Keep it away from heat, liquid and sharp edges. Handle the connector area with care.
Support reliable service
Clear controls help operators manage a vending machine. A properly matched membrane can be one part of restoring normal service. Finish with a full check of the machine, not just a quick button press.
Confirm the model plate
Find the machine model label before you order. The listed model should be 121, 122, 123 or 320. If a machine was changed in the past, the installed control parts may not match its original build.
Compare the face
Look at the size, shape and printed control area on the old membrane. A visual match is helpful but not final proof. The connection and part number matter just as much.
Inspect the connection
Look for a damaged or loose connection. Follow the service guide when opening the control panel. Never pull a cable by its conductors. Use the proper release method if a connector has a lock.
Keep the work area clean
Dust and moisture can make a repair harder. Use a clean, dry surface for the replacement part. Keep loose screws and tools away from exposed control components.
Avoid force
A membrane and its connection can be damaged by rough handling. Do not fold the part or push a connector that does not line up. Stop and compare the old and new parts if something feels wrong.
Test one input at a time
After safe reassembly, use the machine guide to test the available controls. Work through the inputs in a steady order. Note any button that still fails so you can check the full control path.
Record the repair
Write down the date and the installed part number. Include the machine model and the original symptom. Good notes make future troubleshooting faster for you or another technician.
Know the limits of a membrane
A membrane is one part of a larger control system. Replacing it does not repair a damaged board, power issue or wiring fault. A sound diagnosis helps avoid buying parts you do not need.
Use the correct manual
Machine guides can differ by model and revision. Find instructions for the exact unit being serviced. The guide can help with safe access, connection checks and input tests.
Review the order details
Before checkout, confirm that the item is the new AP selection membrane, number 360253. Check the quantity you need. Verify shipping and return terms on the seller site.
Protect the new part
Leave the replacement protected until you are ready to install it. Keep it away from heat, liquid and sharp edges. Handle the connector area with care.
Support reliable service
Clear controls help operators manage a vending machine. A properly matched membrane can be one part of restoring normal service. Finish with a full check of the machine, not just a quick button press.
Confirm the model plate
Find the machine model label before you order. The listed model should be 121, 122, 123 or 320. If a machine was changed in the past, the installed control parts may not match its original build.
Compare the face
Look at the size, shape and printed control area on the old membrane. A visual match is helpful but not final proof. The connection and part number matter just as much.
Inspect the connection
Look for a damaged or loose connection. Follow the service guide when opening the control panel. Never pull a cable by its conductors. Use the proper release method if a connector has a lock.
Keep the work area clean
Dust and moisture can make a repair harder. Use a clean, dry surface for the replacement part. Keep loose screws and tools away from exposed control components.
Avoid force
A membrane and its connection can be damaged by rough handling. Do not fold the part or push a connector that does not line up. Stop and compare the old and new parts if something feels wrong.
| Refurbished | No |
|---|---|
| SKU | AP360253 |
| Weight | 0.250000 |
| Manufacturer | Automatic Products |
| Short Description |
|
Why Buy A Refurbished Machine?
Great Returns - Commercial Grade Machines - Affordability
New vs Refurbished
We used to sell new machines as well as reconditioned ones. We no longer sell new, for one main reason.
According to a recent survey of vending operators, about 93 out of 100 potential vending accounts don't generate enough revenue to justify the cost of new equipment. New machines are great if you have high volume accounts, but most people do not have these accounts.
Typical pricing on new "commercial grade" machines:
- Can drink machines: $6,200–$7,400
- Snack machines: $6,600–$8,500
- Cold food machines: $8,900–$11,700
(Priced with mech and validator, typical options, vendor pricing not including sales tax or shipping in some cases.)
As you can see, that's quite high compared to used or refurbished equipment.
Please remember 'anyone and everyone' can call their machines refurbished but what does that really mean? Please see our machine ratings page for what we actually do to our machines. Many of our competitors don't even 'clean or paint the inside' of the machines.
Start small and grow as you can afford it.Many people start in the vending business without much knowledge, and that can hurt them financially if they're not careful.
All of the machines that we sell are full size, commercial machines. There are many machines that are made that are small, countertop or mechanical coin acceptance. These machines are fine if you are a housewife looking to make a little extra money on the side. We used to sell those type of machines and no longer do. The main reason is that people who were serious about vending would out grow these type of machines in several months.
Small mechanical machines have two main problems:
- They don't make change or accept dollar bills
- They "work you to death" — frequent refills for very little payoff
Most hold under 100 products and gross only $40–$50 per full restock, and profit is less than half of that.
A full-size commercial machine, by contrast, usually holds 350 to 600 products and empties out at $250–$500. Since you spend most of your time just driving to the location, you might as well fill 500 products instead of 50.
