Dixie Narco Double Column Motor Red/White Disk (Refurbished)
Automatic Products 111 / 112 / 113 / 121 / 122 / 123 Motor #360138 (Used)
Dixie Narco Double Column Spider Motor (Refurbished)
Dixie Narco Double Column Motor Red/White Disk – Refurbished
Keep your Dixie Narco beverage vending machine operating smoothly with the Dixie Narco Double Column Motor Red/White Disk. This refurbished vending machine motor is designed for early-frame Dixie Narco machines that use a double-column vend system. It is a practical replacement when an original motor is worn, damaged, or no longer completing vending cycles correctly.
The motor is listed as a factory vend motor and includes the switches needed for the assembly. The red and white disk makes this motor easy to identify when servicing older Dixie Narco equipment. It is listed for use with Dixie Narco models 240, 276, 368, and 440. Always verify the motor style and machine configuration before ordering.
Reliable Motor for Dixie Narco Vending Machines
A vending machine motor plays an important role in the dispensing process. When a customer makes a selection, the motor must operate correctly to move the vending mechanism through its cycle. A worn motor can lead to incomplete rotations, failed vends, or repeated service calls.
The Dixie Narco Double Column Motor Red/White Disk provides a replacement option for compatible early-frame machines. Its double-column design is intended for the vending mechanism used in compatible Dixie Narco equipment.
Replacing a faulty motor can help restore dependable vending operation without replacing an entire machine. This makes the motor a useful part for vending operators, technicians, route owners, and repair professionals who maintain older Dixie Narco machines.
Key Product Features
- Manufacturer: Dixie Narco
- Product: Double Column Motor
- Style: Early Frame Style
- Disk: Red/White Disk
- Compatibility: Dixie Narco 240, 276, 368, and 440
- Switches: Includes switches
- Type: Factory vend motor
- Condition: Refurbished
- SKU: DNMODCO
Designed for Double-Column Applications
This motor is made for a double-column vending setup. The motor works as part of the machine's mechanical dispensing system. Proper motor operation helps the vending mechanism complete its intended movement after a product selection is made.
The double-column configuration is especially important when selecting a replacement motor. Vending motors can look similar while using different mounting styles, disks, switches, or internal configurations. Matching the replacement motor to your machine is an important step before installation.
The red/white disk also helps identify this particular motor style. If you are servicing an older Dixie Narco machine, compare the existing motor, disk, mounting arrangement, and machine model with the replacement before placing an order.
Compatible Dixie Narco Models
Vending World lists this motor for several Dixie Narco machines. The listed compatible models include:
- Dixie Narco 240
- Dixie Narco 276
- Dixie Narco 368
- Dixie Narco 440
These machines may have different configurations depending on their production year and previous service history. For that reason, model number alone should not be the only factor used when identifying a replacement motor.
Compare your existing motor with the product photos and specifications. If you are unsure, check the motor style and disk configuration before installation.
Refurbished Vending Motor
This Dixie Narco motor is sold as a refurbished component. Refurbished vending parts can be a useful option for maintaining established vending equipment, especially when operators want to repair a machine instead of replacing a larger assembly.
A replacement motor can also help reduce unnecessary downtime. Instead of taking a complete machine out of service for an extended period, a technician can diagnose the motor and replace the failed component when appropriate.
Vending World lists this product with a 90-day limited warranty. Warranty terms should be reviewed before installation and use.
Why Replace a Worn Vending Motor?
A vending motor can experience normal wear over time. Frequent vending cycles place repeated demands on mechanical components. Older machines may also have motors that have been operating for many years.
A failing motor may show several signs. These can include unusual operation, incomplete movement, or a vend mechanism that does not finish its normal cycle. However, these symptoms can also come from switches, wiring, product loading, mechanical obstructions, or other vending components.
Proper troubleshooting can help identify the source of the problem before replacing the motor.
Benefits for Vending Operators
- Restore machine operation: Replace a motor that is no longer working correctly.
- Reduce downtime: Keep compatible machines in service with a replacement component.
- Support older equipment: Maintain established Dixie Narco vending machines.
- Match the original design: The product is made for an early-frame double-column application.
- Includes switches: The listed motor comes with switches for the assembly.
- Easy identification: The red/white disk helps distinguish this motor style.
Installation Considerations
Always disconnect the vending machine from electrical power before servicing internal components. Access the motor assembly according to the service procedure for your specific Dixie Narco machine.
Before removing the original motor, take note of the wiring arrangement and motor position. Photos can be useful during reassembly. Compare the replacement motor with the original before connecting wires or securing the motor.
- Disconnect power from the vending machine.
- Open the machine and access the appropriate motor assembly.
- Compare the replacement motor with the original component.
- Document the wiring and switch arrangement before removal.
- Remove the existing motor and mounting hardware as required.
- Install the replacement motor in the correct position.
- Reconnect the wiring and switches correctly.
- Check the disk position and mechanical alignment.
- Restore power and perform a controlled test vend.
- Confirm that the vending mechanism completes its cycle correctly.
Installation should be performed by a qualified vending machine technician when required. Incorrect wiring or installation can damage components or create an electrical hazard.
Maintenance Tips
Regular maintenance can help extend the service life of vending equipment. Keep the motor area clean and inspect the mechanism during routine service visits.
- Check for loose wires or connectors.
- Inspect switches for visible damage or wear.
- Check the red/white disk for proper positioning.
- Look for obstructions in the vending mechanism.
- Inspect related mechanical parts for excessive wear.
- Keep the machine clean and properly maintained.
- Test the machine after completing repairs.
Do not assume the motor is the cause of every vending problem. A failed vend can also result from a damaged switch, wiring issue, mechanical obstruction, incorrect product loading, or another component in the vending system.
Useful Replacement Part for Older Dixie Narco Machines
Older vending machines can remain valuable assets when properly maintained. Replacing individual components can help operators keep dependable equipment working while avoiding the cost of replacing an entire machine.
The Dixie Narco Double Column Motor Red/White Disk is a useful replacement option for compatible early-frame machines. Its listed fitment includes the Dixie Narco 240, 276, 368, and 440, making it suitable for several established machine platforms.
The factory vend motor design, red/white disk, double-column configuration, and included switches make this part easy to identify when searching for a replacement. The refurbished condition also makes it an option for operators looking to repair existing equipment.
Order the Dixie Narco Double Column Motor
If your compatible Dixie Narco vending machine needs a replacement double-column motor, the Dixie Narco Double Column Motor Red/White Disk provides a practical repair solution. It is listed under SKU DNMODCO and is currently offered by Vending World as a refurbished factory vend motor.
Before ordering, confirm your machine model and motor configuration. Check that your equipment uses the early-frame red/white disk style and that the listed compatibility matches your machine.
With the correct replacement part, vending operators can repair compatible equipment and get machines back into normal service. For older Dixie Narco machines, having the correct motor on hand can also make routine maintenance and emergency repairs easier.
Product Summary
The Dixie Narco Double Column Motor Red/White Disk is a refurbished factory vend motor designed for compatible early-frame Dixie Narco vending machines. It features the red/white disk style, includes switches, and is listed for Dixie Narco models 240, 276, 368, and 440.
Product highlights:
- Refurbished Dixie Narco double-column motor
- Early-frame style
- Red/white disk
- Fits listed Dixie Narco 240, 276, 368, and 440 machines
- Includes switches
- Factory vend motor
- SKU DNMODCO
- Ideal for repair and replacement applications
Choose the correct motor for your Dixie Narco machine and help keep your vending equipment operating reliably. Always verify compatibility before installation.
| Refurbished | Yes |
|---|---|
| SKU | DNMODCO |
| Weight | 3.050000 |
| Manufacturer | Dixie Narco |
| Short Description |
|
Why Buy A Refurbished Machine?
Great Returns - Commercial Grade Machines - Affordability
New vs Refurbished
We used to sell new machines as well as reconditioned ones. We no longer sell new, for one main reason.
According to a recent survey of vending operators, about 93 out of 100 potential vending accounts don't generate enough revenue to justify the cost of new equipment. New machines are great if you have high volume accounts, but most people do not have these accounts.
Typical pricing on new "commercial grade" machines:
- Can drink machines: $6,200–$7,400
- Snack machines: $6,600–$8,500
- Cold food machines: $8,900–$11,700
(Priced with mech and validator, typical options, vendor pricing not including sales tax or shipping in some cases.)
As you can see, that's quite high compared to used or refurbished equipment.
Please remember 'anyone and everyone' can call their machines refurbished but what does that really mean? Please see our machine ratings page for what we actually do to our machines. Many of our competitors don't even 'clean or paint the inside' of the machines.
Start small and grow as you can afford it.Many people start in the vending business without much knowledge, and that can hurt them financially if they're not careful.
All of the machines that we sell are full size, commercial machines. There are many machines that are made that are small, countertop or mechanical coin acceptance. These machines are fine if you are a housewife looking to make a little extra money on the side. We used to sell those type of machines and no longer do. The main reason is that people who were serious about vending would out grow these type of machines in several months.
Small mechanical machines have two main problems:
- They don't make change or accept dollar bills
- They "work you to death" — frequent refills for very little payoff
Most hold under 100 products and gross only $40–$50 per full restock, and profit is less than half of that.
A full-size commercial machine, by contrast, usually holds 350 to 600 products and empties out at $250–$500. Since you spend most of your time just driving to the location, you might as well fill 500 products instead of 50.
