Dixie Narco E-Model Single Column Can Shim #805701140.01 (minimum order 3) (NEW)
Dixie Narco E-Model Conversion 12 oz Can Shim Kit #60907260004 (NEW)
Dixie Narco E-Model Double Column Can Shim #801812040.11 (minimum order 4) (NEW)
Dixie Narco E-Model Single Column Can Shim #805701140.01
Keep your Dixie Narco beverage vending machine operating with the right replacement parts. The Dixie Narco E-Model Single Column Can Shim #805701140.01 is a new replacement shim designed for select Dixie Narco E-Model beverage machines. This part fits Dixie Narco 276E, 501E, and 600E machines and is made for use with one single column. The manufacturer part number is 80570114001.
This single-column can shim is a practical replacement for vending operators, service technicians, and businesses maintaining Dixie Narco beverage equipment. When a vending machine needs a specific internal part, using the correct model and part number can make maintenance easier. Instead of replacing a larger assembly, a properly matched replacement component can help you service the machine and keep it ready for daily operation.
Product Overview
The Dixie Narco E-Model Single Column Can Shim is designed for compatible E-Model beverage vending machines. Vending World lists this item as a new part and identifies it by SKU D80570114001. The listed product information also identifies it as a 16.9 oz bottle shim and specifies compatibility with the 276E, 501E, and 600E E-Model machines.
A shim is a small but important vending machine component. Internal vending mechanisms depend on proper spacing and positioning. When a component becomes worn, damaged, or needs replacement during service, the correct shim can help restore the intended setup of the machine. The exact application depends on the vending machine model and the configuration being serviced.
Designed for Dixie Narco E-Model Machines
This replacement shim is intended for specific Dixie Narco E-Model beverage vending machines. According to the product listing, it fits the following models:
- Dixie Narco 276E
- Dixie Narco 501E
- Dixie Narco 600E
- Compatible E-Model beverage vending machines
The part is designed for one single column. This makes it important to confirm your machine configuration before ordering. A single-column application is different from a double-column setup, so operators should match the replacement part to the machine and column configuration being serviced.
Replacement Part #80570114001
Part numbers are one of the easiest ways to identify a vending machine replacement component. This Dixie Narco shim is identified by manufacturer part number 80570114001, also written in the product title as 805701140.01. The Vending World listing identifies the item as SKU D80570114001.
Using the correct part number can help reduce ordering errors. Before purchasing, compare the number on your existing component, service documentation, or parts list with the number listed here. You should also verify the vending machine model and column configuration.
Why the Correct Shim Matters
Vending machines contain many moving and stationary parts that must work together. A small spacing or alignment component can have an important role within the machine's product delivery system. If a shim is missing, damaged, or incorrect for the application, the internal setup may not perform as intended.
Replacing the correct component can be a more direct maintenance solution than attempting to modify an unrelated part. For vending operators, this can help make service work more organized and reduce the time spent searching for compatible replacement parts.
The Dixie Narco E-Model Single Column Can Shim is therefore a useful part to keep available when maintaining compatible beverage machines. It can also be helpful for vending repair shops and operators who maintain several Dixie Narco machines.
New Dixie Narco Replacement Part
This product is listed as a NEW PART. A new replacement part can be useful when you want to replace a worn or damaged component with a fresh part rather than reuse an old component.
Keeping commonly needed replacement parts available can also make vending maintenance more efficient. If a machine is being serviced, having the correct part on hand may help reduce delays caused by waiting for a replacement.
Single Column Application
The single-column design is one of the key details to check before ordering this shim. The product listing specifically states that the part is for one single column.
If you are working on a Dixie Narco machine with multiple product columns, identify the exact location and configuration that requires service. Do not assume that a single-column part will replace a double-column component. Vending machines can use different parts based on the machine model and product configuration.
16.9 oz Bottle Shim
Vending World's product information describes this item as a 16.9 oz bottle shim. This specification is useful when matching the component to the product configuration of your machine.
Product packaging and vending machine configurations can vary. For that reason, operators should verify the machine model, existing part number, and product setup before installation. Matching all three details can help ensure that the replacement part is appropriate for the intended application.
Useful for Vending Machine Maintenance
Regular maintenance is an important part of operating beverage vending equipment. Operators commonly inspect product delivery components, motors, electrical parts, coin mechanisms, bill validators, cooling systems, and other internal components. Small replacement parts such as shims can be part of that maintenance process.
The Dixie Narco E-Model Single Column Can Shim is suitable for operators who want to maintain compatible machines with model-specific replacement parts. It can be useful for:
- Vending machine operators
- Vending machine repair technicians
- Vending equipment distributors
- Vending machine service companies
- Businesses maintaining Dixie Narco beverage machines
- Replacement-parts inventories
- Preventive maintenance programs
Check Compatibility Before Ordering
Compatibility should always be checked before installing a vending machine replacement part. The product listing identifies this shim as fitting Dixie Narco 276E, 501E, and 600E E-Model machines.
Compare your machine's model number with the information above. Also confirm that your machine uses a single-column configuration and that the application calls for the 80570114001 shim. If you are unsure about compatibility, consult the machine's parts documentation or a qualified vending machine technician.
Easy Part Identification
Finding the right vending machine part becomes easier when you have the manufacturer, model, and part number available. For this product, the key identification details are:
- Manufacturer: Dixie Narco
- Part Type: Can shim
- Manufacturer Part Number: 80570114001
- Product Number Format: 805701140.01
- Vending World SKU: D80570114001
- Application: One single column
- Machine Family: Dixie Narco E-Model
- Compatible Models: 276E, 501E, and 600E
- Product Application: 16.9 oz bottle
- Condition: New part
These details can help you compare the replacement part with your machine before placing an order.
Keep Your Vending Parts Inventory Ready
For vending operators with multiple machines, maintaining an organized parts inventory can save time. A small replacement component may not take up much storage space, but having the correct part available can make a difference when a machine requires service.
Keeping Dixie Narco replacement parts on hand can be especially useful for operators who maintain several E-Model beverage machines. Instead of waiting until a machine is out of service to identify the needed component, operators can organize commonly used parts by manufacturer, model, and part number.
Order the Dixie Narco E-Model Single Column Can Shim
The Dixie Narco E-Model Single Column Can Shim #805701140.01 is a new replacement component for compatible Dixie Narco beverage vending machines. It is listed for the 276E, 501E, and 600E E-Model machines and is intended for a single-column, 16.9 oz bottle application.
When maintaining vending equipment, choosing a part that matches the machine model and application is essential. This Dixie Narco shim provides a model-specific replacement option for operators and technicians working on compatible E-Model machines.
Before ordering, confirm your machine model, column configuration, and existing part number. If all specifications match, the Dixie Narco E-Model Single Column Can Shim #80570114001 can be added to your vending maintenance inventory or used as a replacement during service.
Key Features at a Glance
- New Dixie Narco replacement part
- Manufacturer part #80570114001
- Vending World SKU D80570114001
- Designed for Dixie Narco E-Model machines
- Fits 276E, 501E, and 600E models
- Single-column application
- Listed for 16.9 oz bottle use
- Useful for vending machine maintenance and repairs
- Model-specific replacement component
- Ideal for operators and vending service technicians
Choose the correct replacement part for your Dixie Narco E-Model beverage machine. Verify your model and single-column configuration, then use the manufacturer part number 80570114001 to help confirm that this shim matches your service requirements.
| Refurbished | No |
|---|---|
| SKU | D80570114001 |
| Weight | 1.650000 |
| Manufacturer | Dixie Narco |
| Short Description |
|
Why Buy A Refurbished Machine?
Great Returns - Commercial Grade Machines - Affordability
New vs Refurbished
We used to sell new machines as well as reconditioned ones. We no longer sell new, for one main reason.
According to a recent survey of vending operators, about 93 out of 100 potential vending accounts don't generate enough revenue to justify the cost of new equipment. New machines are great if you have high volume accounts, but most people do not have these accounts.
Typical pricing on new "commercial grade" machines:
- Can drink machines: $6,200–$7,400
- Snack machines: $6,600–$8,500
- Cold food machines: $8,900–$11,700
(Priced with mech and validator, typical options, vendor pricing not including sales tax or shipping in some cases.)
As you can see, that's quite high compared to used or refurbished equipment.
Please remember 'anyone and everyone' can call their machines refurbished but what does that really mean? Please see our machine ratings page for what we actually do to our machines. Many of our competitors don't even 'clean or paint the inside' of the machines.
Start small and grow as you can afford it.Many people start in the vending business without much knowledge, and that can hurt them financially if they're not careful.
All of the machines that we sell are full size, commercial machines. There are many machines that are made that are small, countertop or mechanical coin acceptance. These machines are fine if you are a housewife looking to make a little extra money on the side. We used to sell those type of machines and no longer do. The main reason is that people who were serious about vending would out grow these type of machines in several months.
Small mechanical machines have two main problems:
- They don't make change or accept dollar bills
- They "work you to death" — frequent refills for very little payoff
Most hold under 100 products and gross only $40–$50 per full restock, and profit is less than half of that.
A full-size commercial machine, by contrast, usually holds 350 to 600 products and empties out at $250–$500. Since you spend most of your time just driving to the location, you might as well fill 500 products instead of 50.
